Steroids and Peptides Everything

Anabolic Steroid Raw Steroid Powders Supplier, Injectable Steroid, email:

Making Anabolic Steroids Method at Home

Making Anabolic Steroids Method at Home

While making injectables
The number one thing you should be thinking of is practicing isolation of sterilized surfaces and items.

That is, if a piece is sterile, be sure that it doesn’t touch anything that is non-sterile. If your hands touch something that you haven’t sterilized, swap gloves. Think of it as a tattoo artist, a piercer, or your doc would. Cross-contamination can wreck the final product.

Work in an area or on a tray that you have wiped down with antiseptic solution before use and make sure you are working in an area with no air flow OR under a laminar flow hood(If you have access or know how to make one). If you are using pre-sterilized and sealed vials the airflow issue isn’t as important.
Sterilizing your instruments:

Other than your final work surface, the only things you should be worried about keeping sterile are as follows.
1. Stoppers and vials.
I’ll go through a method for sterilizing both a bit later, if you aren’t using pre-sterilized/sealed vials. Most doing small batches should probably just purchase the sealed vials for ease of use.
2. Your final filters
3. Anything you may be using to transfer the sterilized solution from a larger container to a smaller one if applicable.
Several types of filtration systems and why you should consider using them
1. Syringe filters
This is probably the most popular type for the small time home brewer.
I would use this method on single batches up to 100ml or for multiple batches for making a single cycle.

2. Sterilized, self contained vacuum filtration.
This would be for single batches in excess of 200ml.
They provides for simple and fast filtration of very large single item batches.
You must practice better sterilization and isolation techniques with most brands.

3. Vacuum driven bottle top filtration systems.
This would be used for VERY large batches; >1L in quantity.
Same guidelines as above, only for use with 1L+ volume vacuum safe media bottles.
For people wishing to use syringe filters, be sure they’re STERILE for your final filter. I prefer to prefilter with an unsterilized .45um filter and then do a final pass through a .22um or .2um filter. If you are using a sealed vial you’ll want to have one with a male luer lock on it. Some do not come with luer lock ends, but with luer slip.

When using a vacuum filtration system of any kind you’ll need a source for the negative pressure. Most people use a hand pump of the variety you can find at any autoparts store, some are more advanced with a small electric pump.

With vacuum systems you’ll want to keep your pressure just to the point where it filters smoothly, if you go too high you can and probably will crack the media bottle, then you’ve wasted a bit of money and need to refilter.

Solvents, co-solvents, and oils
I would recommend that you use all USP grade products, but if you don’t feel like shelling out the major cash to buy USP oils, food grade will work. You’ll find yourself going through filters much faster with food grade oils than with USP grade oil.
I recommend grape seed, cotton seed, or sesame seed oils for your choices. Though just about anything you can find at the store will work. I wouldn’t recommend Wesson, but it will work, you won’t be able to shoot that through a 25g needle though.

Never compromise on your solvent choices, all recipes should have a minimum of 1% benzyl alcohol and 5% benzyl benzoate. All should be of USP-24 grade or higher.

Mr. T’s ‘super solvent’ will be sufficient alone if you have a particularly stubborn product you wish to make into an injectable solution. I’m not going to list a bunch of recipes, because we all have our personal preferences to that end. Generally, if you use the lowest possible concentrations of solvents you can to keep your solution from crashing, it is all you need. If you feel more comfortable using 5% ba and 20%bb for everything then you can do that as well.
Sterilization of vials and stoppers
1. Clean your vials
a. Wash with soap and distilled water, rinsing with distilled water
b. Rinse a second time with an alcohol of your choosing. I prefer to use isopropyl. Acetone is also acceptable
2. Dry and Heat your vials.
a. Place them upside down on a baking sheet that has been properly wiped with an antiseptic.
b. Preheat oven to 350*. Place vials in oven and let set for about 30mins, allow the vials to cool to room temp and then repeat the process.
3. Soak stoppers in a hydrogen peroxide solution for a minimum of 10 mins.
All other items you use that should be sterilized come from the factory sterilized; syringes, needles, and filters.

whatsapp: +8617707569722
wickr: bulkraw
skype: amy01_10


%d bloggers like this: